Avaya Cajun P882 - Manual (Page 254)

9-30
Chapter 9
Cajun P550/P880/P882 Switch User Guide
3. Select Global Configuration from the Routing > IGMP group
on the web agent window. The IGMP Global Configuration
dialog box opens (Figure 9-14).
Figure 9-14. IGMP Global Configuration Dialog Box
4. Select Enable from the IGMP field pull-down menu to enable
IGMP.
5. Select Enable from the MTRACE field pull-down menu to
enable MTRACE processing.
6. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Globally
Enabling IGMP
Using the CLI To globally enable IGMP using the CLI, enter the following
command from Configure mode:
cajun (configure)# set igmp-snooping enable
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Modifying IGMP
Interfaces Using
the Web Agent To modify IGMP interfaces from the web agent:
1. Select Interfaces from the Routing > IGMP group on the web
agent window. The IGMP Interfaces dialog box opens
(Figure 9-1).
* Note: You must first enable a multicast protocol before
you can configure IGMP. Refer to “Creating an IP
Interface” earlier in this chapter for more
information on how to select a multicast
protocol.