Avaya Cajun P882 - Manual (Page 247)

Cajun P550/P880/P882 Switch User Guide
Configuring IP Routing
9-23
Figure 9-8. IP Access Control Dialog Box
2. Select Enable from the Enable field pull-down menu to filter
inbound traffic.
3. Select the name of the access list to be used for filtering when
IP access control is enabled from the IP Access List field pull-
down menu.
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Activating
Access Lists
Using the CLI To activate an access list using the CLI, enter the following
command in configure mode:
cajun (configure)# ip access-list <access-list-name> <access-
list-index> {permit|deny|fwd[1-8]} {<source-ip-addr> [<source-
wildcard>] |any|host <source-ip-addr>}
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Creating IP Static Routes
You can create IP static routes using either the web agent or the CLI.
Creating IP
Static Routes
Using the Web
Agent To create IP static routes using the web agent:
1. Select Static Routes from the Routing > IP > Configuration
group on the web agent window. The IP Static Routes dialog
box opens (Figure 9-38).