Avaya Cajun P882 - Manual (Page 476)

17-16
Chapter 17
Cajun P550/P880/P882 Switch User Guide
Setting Log Size
Using the CLI To set log size using the CLI, enter the following command from
User mode:
cajun#show logging history size <128, 512, 1024,
2048>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about these commands.
Configuring Event Notification
You can configure event notification using either the web agent or
the CLI.
Configuring
Event
Notification
Using the Web
Agent To configure event notification:
1. Select Event Log from the Events group on the web agent
window. The Event Log Search dialog box opens (Figure 17-
6).
2. Click the check box next to the Event Type field.
3. Select an event type from the pull-down menu. The delivery
of event information is enabled when this type of event
occurs.
4. Refer to Table 17-8 for an explanation of the parameters in
the Action column on the General Event Management dialog
box. If you do not select an event, no action is taken when an
event of this event class occurs.
5. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Table 17-8. Action Column Parameters
Setting... Determines...
Log Event entry entered in event and shutdown logs.
Trap SNMP trap message (event notification) sent to
designated trap receivers.
Console Displays the event information to the console serial
port connected at the switch front panel.