Avaya Cajun P882 - Manual (Page 307)

Cajun P550/P880/P882 Switch User Guide
Configuring IP Routing
9-83
Configuring the IP Interface for the PPP Console
You can configure an IP interface for the PPP console from either the
web agent or the CLI.
Configuring the
IP Interface for
the PPP Console
Using the Web
Agent To configure the PPP console with an IP address and mask using the
web agent:
1. Configure your console serial port as a PPP Console. See
“Connecting a Modem”, in Chapter 2, Initialize and Setup of
the P550/P880/P882 Switch.
2. Connect your modem cable to the switch’s serial port.
3. Select Interfaces from the Routing > IP > Configuration group
on the web agent window. The IP Interfaces dialog box opens
(Figure 9-31).
4. Select CREATE. The Add IP Interface dialog box opens
(Figure 9-40).