ETC Cobalt Family v7.0.0 - Manual (Page 103)

101
Main Playback crossfaders (bottom right corner of the console).
Action Console Feedback
2. Reset the crossfaders by
moving the up and back
down A/B faders to bottom
position
Check The Output
After loading a new Play the patch is set 1:1 and the output protocol will be set to DMX512 on both
output connectors in the back of the console.
If you enter a number and move the level wheel, a dimmer should respond - providing there is one
connected.
If nothing happens, see Lights Are Not Responding .