ETC Cobalt Family v7.0.0 - Manual (Page 922)

920
Console Key - PALETTE (Alt P)
The PALETTE key is used for recording and recalling All Palettes, containing information from all
parameters in a device.
• [RECORD] & [PALETTE] - Record the next free palette for the currently selected devices.
• [#] [RECORD] & [PALETTE] - Record a new palette for the currently selected devices.
• [#] [PALETTE] - Recall a recorded palette for the currently selected devices.
• [MODIFY] & [PALETTE] - Open the All palette list.
• Hold [PALETTE] - When PALETTE is held, all existing palettes 1-40 can be accessed from
the direct select keys.
For more information see Devices - Palettes , Record An All Palette , Device Palettes - Direct Mode.
Keyboard equivalent: [ALT] & [P]
Console Key - PARAMETER
The PARAMETER key in the big Cobalt console is used to set the trackball to Parameter mode,
controlling pan & tilt.
• [PARAMETER] - Set the trackball to parameter mode. Trackball will be blue.
For more information see Facepanel - Trackball .
There is no keyboard equivalent
Console Key - PARK
The PARK key is used to park a channel or part of a channel.
• [PARK] & [CHANNEL] - Parks intensity and attributes of the selected channel(s).
• [PARK] & [@LEVEL] - Parks intensity of the selected channel(s).
• [PARK] & [ATTRIB] - Parks attributes of the selected channel(s).
• [PARK] & [FOCUS] - Parks focus attributes of the selected channel(s).
• [PARK] & [COLOR] - Parks color attributes of the selected channel(s).
• [PARK] & [BEAM] - Parks beam attributes of the selected channel(s).
• [PARK] & [Wheel_Key] - Parks the attribute of the selected channel(s).
• [MODIFY] & [PARK] - Opens the Park list
For more information see Park - Parked values .
Keyboard equivalent: None