ETC Cobalt Family v7.0.0 - Manual (Page 268)

266
Output Editor - Patch By Channel
As soon as a channel is selected, the Output Editor is automatically in channel mode. Select a single
channel or a range of channels to patch to Outputs. Use 0 MODIFY to unpatch.
Patch a single channel
Action Key Feedback
1. Select channel [#] [CHANNEL] Channel is selected.
2. Patch to output [#] [MODIFY] A popup will ask if you
want to replace existing
output(s)*
3. Confirm [MODIFY] Patch is complete.
*
Patch a channel range
Action Key Feedback
1. Select channel range Channel functions Channels are selected
2. Patch to output(s) [#] [MODIFY] A popup will ask if you
want to patch a range of
outputs starting at #
3. Confirm [MODIFY] Patch is complete.
Output Editor - Patch By Dimmer
As soon as an output is selected, the Output Editor is automatically in outputmode. Select a single
output or a range of outputs to patch to channels. Use 0 MODIFY to unpatch.