ETC Cobalt Family v7.0.0 - Manual (Page 651)

649
Device Times - Fan Times
In the Live and Preset Attribute Views there is a wizard for fanning parameter times. This Wizard will
only open when a Time or Delay cell is selected. The selected cells are fanned between the devices.
1. Open an Attribute view. See Device Views - Live and Device Views - Presets .
2. Open the Time and Delay rows by holding FORMAT and pressing the Down Arrow.
See
Device Times - Attribute Time Editor .
3. Select the Time or Delay cells for the parameters and devices intended.
4. Press WIZARD. The Fan Time Wizard popup will open.
5. Select values and confirm.