ETC Cobalt Family v7.0.0 - Manual (Page 1030)

1028
adjust. Note that regardless of which device you use to open this tab, it will show all devices of that
model in the same table.
All data in this tab is generated by the RDM device and is then displayed by Cobalt. Parameters you
can edit are shown in white text. Changes you make in this tab are sent directly to the device and are
not stored in any way by Cobalt. The valid data for a parameter is wholly dependent on the way the
device manufacturer has developed their RDM functionality. Valid input may be numerical (type the
new value and press MODIFY) or may be entered using a drop down menu (usually shown in text).
Consult the user manual for the device to understand the impact of changing parameters in this tab.
RDM Device Sensor List
The Device Sensor List provides access to the sensor information an RDM Device transmits (read-
only). This list is only available when there are discovered RDM devices. It is opened from the RDM
Device List by pressing MODIFY in the Sensors cell of the device whose sensor data you wish to
view. Regardless of which device you use to open this tab, it will show all devices of that model in the
same table.