ETC Cobalt Family v7.0.0 - Manual (Page 175)

173
Face Panel test
A test application to help check the buttons, faders and encoders on your console is operating
correctly. On non-Cobalt hardware, this will also test any connected Wings.
UpdaterAtor
A simple and fast way to update firmware in Ethernet-connected ETC hardware, eg Net3 Gateways.
Installed separately.
I/O Test
A utility to test the functionality of the I/O card within the console.
Gateway Configuration Editor (GCE)
Configuration tool for all types of ETC Net3 Gateways and RFR Base Stations. Installed separately.
Network Configuration Editor (NCE)
Configuration tool for ETCNet2 Nodes. Installed separately.
WinDFB
Configuration tool for FDX dimmers. Installed separately.
Touch test
A test application to check touchscreen operation.
Copy Log files to USB…
Copies console log files to a USB stick. Please provide these to ETC technical services in the event of
finding an issue in your console.
Backup Settings
Creates a backup of your console settings in case you need to reimage the system.
Restore Settings
Allows you to restore settings from a backup.
Deep Clear
Deletes the Last Saved Data and internal caches.