ETC Cobalt Family v7.0.0 - Manual (Page 108)

106
Copy, Cut & Paste Attributes
In the Preset List it's possible to copy, cut and paste attributes for the selected channels from any step
to any other step.
1. Open the Preset List.
2. Go to the Attributes Column.
3. Select channel(s) to copy or cut from.
4. Press COPY to copy, press COPY again to CUT (see the confirmation in the message bar at
bottom of the screen).
5. Move to the attributes column for the Preset you wish to copy to.
6. Press PASTE
NOTE
Attibutes with the value "0" will not be pasted.