ETC Cobalt Family v7.0.0 - Manual (Page 844)

842
Masters - Attribute parameters
Hold a Wheel Parameter key and press a Master Key to load to that Master.
You can load and activate attribute parameters from master playbacks. This is very useful for
parameters that map well to faders, like iris, focus, shutters and color mixing. They are displayed
with a "Pm" before the number in the master displays.
Once an attribute parameter is loaded to a master, and depending on the nature of the parameter, you
can
• Use the master fader as the "parameter wheel"
• Use the master key as the "parameter wheel key"
• Hold the Master key and use the level wheel to change the value relatively
The result is applied to the selected channel(s).
Load a parameter to a master
To load a parameter to master select a device with that parameter, hold the parameter wheel key and
press a master key.