ETC Cobalt Family v7.0.0 - Manual (Page 889)

887
Training Projects
This is visualisation plug-in for training purposes. The projects are created in a third-party software
called Capture and supplied by ETC. The idea is not to run large shows with processor-heavy
visualisation inside Cobalt. It is meant as a training tool that allows you to understand functions like
Dynamic Effects without having a rig.
Training Projects - Open Project
Opening a Training Project
1. Go to the Browser (BROWSER)
2. Navigate with the arrow keys to the File >Open > Play Archive > Demo Plays node
3. Open the file A demo play (this will close the online help - open again and continue)
4. Navigate with arrow keys to the MEDIA node.
5. Open the sub-node Training Projects
6. Open the file A demo play.c2p.
7. You will get a visualisation tab like this
The play loaded will correspond to this training project.