ETC Cobalt Family v7.0.0 - Manual (Page 982)

980
RFR Patch
Press MORE SK and then PATCH to enter the Patch sub menu.
Output Goto Patch
Universe Preset DvAddr
The Patch functions are
Function Key Feedback
Select channel [#] [Chan] Channel # is selected
Select output [#] [Output] Output # is selected
Select output universe [#] [Univ.] Universe # is selected
Patch channel to output [#] [Chan] [#]
[Patch] Channel # is patched to
output #
Patch output to channel [#] [Output] [#]
[Patch] Output # is patched to
channel #
Re-patch a device [#] [Chan] [#]
[DvAddr] Device on channel # is
patched to output #
Note: Existing devices may
be repatched. No new
devices may be patched
from the RFR.
• Outputs can be selected in address.universe format. For example [10.3] [Output] will select
output 10 on universe 3.
• Use the left wheel to jump to next output and the right wheel to set a level to the selected
output.
• Use a number and the @ button to set a channel or output level directly (instead of the right
wheel).
• Use +/- to step outputs as well as channels.
RFR Palettes
Press MORE SK and then PALETTE to enter the Palette sub menu.
Focus Color Beam
• The FCB buttons can be pressed without a number to present a palette list or with a number
to select a palette directly.