ETC Cobalt Family v7.0.0 User Manual
Page 979
977
RFR - General Functionality
The upper display line shows information about the selected channel(s). The labels for the soft buttons
are on the two lower rows of the display. In all displays the wheel controls the level of selected
channels - except in the parameter controls display where the two encoders control the displayed two
parameters (like pan/tilt, etc...)
Top Level
Soft1-6 give direct access to basic channel functionality. Pressing MORE SK will always return to
this level. Pressing MORE SK from the Top Level will show the other menus.
All
100%
Check+
Group
0%
Check-
In all displays, the wheel controls the level of the selected channel(s).
RFR Channel functionality
The most common channel functions can be used to select channels and set levels (At Mode
Command Syntax is supported from v5.1). This includes the console shortcut C & CHANNEL to
clear all channels in A.
• CH
• +
• -
• THRU
• @LEVEL