ETC Cobalt Family v7.0.0 - Manual (Page 740)

738
Dynamics - Relations & Distance
Offset Relation, Delay Relation and Distance set all channels to perform a Dynamic one after the
other, or overlapping.
These parameters can be set in the Live Attribute editor and from the Dynamic Display soft key page.
Offset Relation
Specifies when channels start in relation to the table assigned to them
Offset is set in the Dynamic Effect views (Live and Preset). Press MODIFY in either for a dropdown
with the following options
Action Description
All All devices start at the same point in the table.
Evenly Spread The starting point (offset) is evenly spread.
1:2-1:9 The selected devices are divided in # groups (1:#).
Offset Relation - Dynamics Display
In the Dynamics Display the Offset Relation for the selected Dynamic Effect is mapped to wheel 3.
Activate the Dynamics Soft Key Page in the Main Display of the console facepanel by pressing
DYNAMICS in the top menu.
1. Hold wheel key 3 to get a list of Offset Relations in the display.
2. Select a relation using the wheel.