ETC Cobalt Family v7.0.0 - Manual (Page 807)

805
Masters - Commands
Enter the number of a master and press MASTER to control this master on the level wheel.
You can select a group of masters and set levels numerically from the keypad, similar to how
channels, effects and groups can be selected.
Select masters and set levels
It is possible to select masters and set levels with the MASTER key PROVIDING a Master View is
open and selected.
Keyboard shortcut = F8.
Function Keys Feedback
Open the Master view [MASTER] The Master View is
opened.
Select a Master [#] [MASTER] Master # is selected and
highlighted in the Master
View.
Add [#] [+] Master # is added to the
selection.
Add a range [#] [THRU] Up to Master # are added to
the selection.
Subtract [#] [-] Master # is subtracted.
Set a level [#] [@LEVEL] The levels are set to #.
Set a level [Wheel] The levels are set to #.
Deselect all [0] [MASTER] All are deselected.