ETC Cobalt Family v7.0.0 - Manual (Page 803)

801
Mode Applies to Feedback
Fader type Ch, group, preset,
effect Add = Intensities are piled (HTP)
on top of the output. Attributes are
LTP.
Solo = The content of this fader
replaces all other master faders, but
does not affect levels coming from
the Main Playback.
Fader intensity Ch, group, preset,
effect, chase, Sequence Disabled = intensity is not affected
by moving the fader
Follow manual fader = Intensities
will follow the fader
Follow master time = follows
master times
Fader Attributes Preset, effect, palette Disabled = attributes are not
affected by moving the fader
Follow manual fader = Attributes
will follow the fader
Execute at #% = attributes are
executed when the fader passes #%.
Active parameter
lock Preset, effect Attributes cannot be stolen by
another master or the Main
Playback. Manual control is still
possible.
Return to (FCB) Preset, effect Defines what attributes will return
to at fade down.
None
Previous = last LTP values
Preset = a specified preset
Main Pb = sequence step in A
Preset Preset, effect Return to preset (see above)
NOTE
If several masters have Fade type = Solo, the last Solo master that leaves its
0% position will have priority over the other Solo masters. To take control
with another Solo master, move it down to 0% and up again.