ETC Cobalt Family v7.0.0 - Manual (Page 823)

821
Masters - Groups
Enter the number, hold GROUP and press a Master Key to load to that Master.
You can load and play back groups from master playbacks. They are displayed with a "Gr" before
the number in the master displays.
Once a group is loaded to a master you can
• Use the master fader to set the level
• Use the flash key to flash the group (if it has levels)
• Use the master key to select the channels in the group
NOTE
If a change is made to a Preset or Group that is loaded to a Master which is
active - the change will be pending until the Master is brought to zero and
back up. Pending content indicated with inverted colors on the master LCD.
Load a group to a master
These functions are used to load groups to masters.
Function Keys Feedback
Load a group [#] [GROUP] &
[Master_Key] Group # is loaded. The
number and name are
shown in the master display
Load several groups [#] [GROUP] &
[Master_Keys] Hold Group and keep
pressing Master keys to
load the next stored
Groups