ETC Cobalt Family v7.0.0 - Manual (Page 924)

922
• [#] [GROUP] & [+] - Add the channels in that Group from the current selection
• [#] [PRESET] & [+] - Add the channels in that Preset from the current selection
For more information see Select Channels .
Keyboard equivalent: [CTRL] & [>]
Console Key - PLUS PERCENT (+%)
The PLUS PERCENT key (+%) is part of the channel level keys. It is used to add 5% (default) from
the current selection. It is also used for setting a selection to full in combination with the C/ALT key.
• [+%] - Add 5% from the current channel selection..
• [#] [+%] - Select a channel and add 5%.
• [C/Alt] & [+%] - Flash the current selection to 100% (master content will not be affected).
• [#] [.] & [+%] - Add that level from the current channel selection.
• [SETUP] & [+%] - Change the default level.
For more information see Set Channel levels .
Keyboard equivalent: [CTRL] & [UP]
Console Key - PRESET
The PRESET key is used to store and recall channel levels and moving device attributes. Presets are
fundamental building blocks and can be played back in masters, in sequences and randomly in the
main playback using GOTO. Every Sequence Step uses a Preset to hold the level and attribute
information for that step. The same Preset can be repeated any number of times in any playback or
sequence.
IMPORTANT: For moving devices there are different recording modes. All, Active or Changed. This
will decide what is stored in a preset. Also, there is a difference between recording to the main
playback and to a master.
• [PRESET] - Open the Preset list.
• [#] [PRESET] - Select the channels in Preset #.
• [#] [PRESET] & [CHANNEL] - Select the channels and levels in Preset #.
• [#] [PRESET] & [master key] - Load preset # to that master.
For more information see Presets - Load To Playbacks .
Keyboard equivalent: [P]
Console Key - PRINT SCREEN
The PRINT SCREEN Soft Key (Misc) is used to Print the selected Tab.