ETC Cobalt Family v7.0.0 - Manual (Page 169)

167
Touch/click to select a specific monitor to change its settings. The selected monior is displayed in
gold, and noted above the settings options. Click-and-drag to move individual monitors around so that
the mouse moves in a logical way from one to the next. In Cobalt20/10 there will be two padlocked
screens in the middle representing the interal screens.
Buttons available in the Monitor Arrangement display are:
• Indentify - displays the video port numbers that your monitors are connected to on the
physical monitors to confirm where you have placed them.
• Enabled - When checked, the monitor is available for use. The desk will display the Enabled
box checked for any monitors it recognizes.
• Primary - selects which monitor will display the Cobalt Welcome Screen and System
Settings. On Cobalt, the primary is locked to the right touchscreen on the desk.
• Resolution - sets how many pixels the monitor will display.
• Color Depth - sets how many colors will be displayed.
• Refresh Rate - sets the number of times in a second the monitor refreshes.
• Orientation - sets the monitor layout.
• Apply - will save and use your settings. A window will open asking if you want to KEEP
CHANGES} or REVERT back to the defaults. REVERT will be selected within 15 seconds
if nothing else has been selected first.
• Close - will close the display. CLOSE will not save any settings if Apply has not been used.
Additional buttons are available on Cobalt 10/20.
• Calibrate - Allows you to calibrate touchscreens.
The first display will have you touch some targets, and the second will have you touch
various parts of the display to make sure the cursor follows your finger. If that works fine,
press the green checkbox. If you need to return to the previous display, press the blue arrow
button.
• Reset Calibration - restores default calibration data for selected display.
• Configure Touchscreens - is used to map the touch screens to the displays.