ETC Cobalt Family v7.0.0 - Manual (Page 126)

124
Sensor3 & Sensor+ Dimmer Feedback
These devices will show up in the “Net3/ACN Device List” (Browser >General Settings >Network
>Net3/ACN Device List).
Channel Display
When a channel is patched to an output that is associated with a Sensor3 or Sensor+ dimmer then that
channel will indicate the state of that dimmer.
When the associated dimmer has an error or warning then the channel display will include a small
warning sign as part of the display.
If a channel is selected, the number of active dimmer errors for the channel will be shown in the Info
box below the Browser.