ETC Cobalt Family v7.0.0 - Manual (Page 778)

776
Main Playback - Refresh Functions
The REFRESH key in the Main Playback can be used to refresh any part of a channel to the resulting
state of the current Sequence Step in the Main Playback.
Function Key
Everything [REFRESH]
Attributes of all device(s) [REFRESH] & [ATTRIB]
Levels of all device(s) and channel(s) [REFRESH] & [@LEVEL]
Focus parameters of the selected device(s) [REFRESH] & [FOCUS]
Color parameters of the selected device(s) [REFRESH] & [COLOR]
Beam parameters of the selected device(s) [REFRESH] & [BEAM]
Wheel parameters of the selected device(s) [REFRESH] & [Wheel_key]
U1-U3 of the selected device(s) [REFRESH] & [U1-U3]
Intensities AND attributes for the
selected device(s). [REFRESH] & [CHANNEL]
NOTE
The changed flags are cleared for what you refresh.
The Refresh function will take the currently focused channel into account if
you are using
NEXT/LAST .