Presets - times – ETC Cobalt Family v7.0.0 User Manual
Page 367
Advertising
![background image](/manuals/559086/367/background.png)
365
Presets - Times
The timing information stored in a Preset, is the FCB times for device parameters. Other timing when
used in a Sequence, such as channel times, in/delay/out times are stored in the Sequence Step. (See
Device Times - Individual or FCB
)
• The default setting for FCB times is 100% of the main In time
• The default setting for FCB delay times is 0 seconds. If you set FCB delay times in %, then
that setting refers to main In time.
These times are executed when played back from a Sequence or from a Master Playback.
Advertising