ETC Cobalt Family v7.0.0 - Manual (Page 692)

690
• Contains the channel list and the high/low intensity levels and timing values.
• It has a number of steps, with channels, up, dwell and down times.
• Intensities per step have a Max (high) and Min (low) value.
• Once a Chase object is programmed it will replay in the exact same way.
Playback
• The effect will run as soon as the effect playback intensity is over zero.
• The intensity level of the effect playback also masters the high level of the output of the
effect.
• The intensities will contribute to the Live output on a HTP basis.
Live Parameters
A single Chase Effect Playback can be associated with any Chase object. To play back more than one
Chase object simultaneously you need to insert multiple Chase Effect Playbacks.
• Change direction (Forward, Backward, Bounce, Random)
• Change every step time and content
• Change playback style (Positive, Negative, Build)
Create a Chase
Chases are created in the chase channel distribution wizard.
1. Open the Channel Distribution Wizard. This can be done in two ways.
• # INSERT & EFFECT.
• Press INSERT in the Chase List
• In the Chase List, press MODIFY in the STEPS cell.