ETC Cobalt Family v7.0.0 - Manual (Page 985)

983
Key Function Feedback
Select a channel # [SHIFT]
[CHANNEL] Channel is selected
Add channels # [SHIFT] [THRU] Channels are added to
selection
Select a group # [#] [SHIFT]
[CHANNEL] Channels in Group # are
selected
Select All [SHIFT] [ALL] Selects all channels with a
level that were set from the
remote
Set to Full [SHIFT] [100%] Levels for the selected
channels are set to full
Set to 0% [SHIFT] [0%] Levels for the selected
channels are set to zero
Set to level # # [SHIFT] [@LEVEL] Level # is set for selected
channels
Check mode [SHIFT] [CHECK+]
[SHIFT] [CHECK-] Steps to the Next/Last
channel using level.
Load levels from Preset # # [SHIFT] [PRESET] Levels from Preset # are
loaded
Clear number input [#] [#] Clears number input
Decimal point [#] Decimal point
GO [SHIFT] [Goto/Go] Next crossfade is started
Goto preset/step # [SHIFT] [Goto/Go] Crossfades to preset # or
step # (depending on the
GOTO jumps to setting in
Setup)
Record preset # [SHIFT] [Record] Records Preset # into the
Preset List. Only the levels
set from the remote are
recorded
Examples
Turn on channels 2 thru 5 at Full.
[2] [SHIFT] [CHANNEL] [5] [SHIFT] [THRU] [SHIFT] [100%]
Using the decimal point it is also possible to select and turn on channels recorded in groups.
To set Group 1 at Full