ETC Cobalt Family v7.0.0 - Manual (Page 480)

478
Channels - Scale channel levels
The SCALE key in the Soft Keys makes it possible to apply a scaling factor to the intensity level of
any channel/device.
( Soft Key Pages are commands in the lower right corner of screen 2)
When 100%, channels are controlled and played back at normal or recorded levels. Scale settings
other than 100% will proportionally inhibit or boost the intensity output by the channel. For example,
a channel scaled to 150% will play back 75% when actually recorded and played back at 50% by a
preset.
Scaling is used in situations such as:
• When the light source is too bright due to temporary change of hanging position (100-0%)
• When you need to brighten part of a rig temporarily to adapt it for camera footage (100-
200%).
• When a touring rig is adapted to a different stage size.