ETC Cobalt Family v7.0.0 - Manual (Page 899)

897
Console Key - CHANNEL
The CHANNEL key is used to select channels, and in combination with other keys for additional
channel functions.
• [#] [CHANNEL] - Select that channel (if you are operating in At Mode, this key is not used
in the same way).
• [C/Alt] & [CHANNEL] - Clear levels and channel selection in the selected channel view.
• [CHANNEL] & [up/down arrow] - Scroll in the selected channel view.
• [CHANNEL] & [@LEVEL] - Set the levels of the selected channel(s) temporarily to 100%
for identifying.
• [#] [CHANNEL] & [TIME] - Record a channel time for the selected channel(s).
• [#] [CHANNEL] & [DELAY] - Record a channel Delay for the selected channel(s).
• [ON/FETCH]&[CHANNEL] - Revert (undo) level changes back to value at initial selection.
For more information see Select Channels .
Keyboard equivalent: [-]
Console Key - CHANNEL SET
The CHANNEL SET soft key in the EFFECTS soft key menu, is used to open the Channel Set editor
for effects.
• [CHANNEL SET] - Opens the Channel Set editor.
For more information see Channel Sets
There is no keyboard equivalent
Console Key - CHAN DELAY
CH DELAYT is a soft key in the TIME menu of the console main display. It is used to record
individual channel delay times. Times are recorded to the Sequence Step in A or B depending on the
setting of Times.
• [#] [CH DELAY] - Record that time to the currently selected channel(s).
For more information see Sequence Times - Channel Times .
There is no keyboard equivalent.
Console Key - CHAN TIME
CH TIME is a soft key in the TIME menu of the console main display. It is used to record individual
channel times. Times are recorded to the Sequence Step in A or B depending on the setting of Times.