ETC Cobalt Family v7.0.0 - Manual (Page 310)

308
Template Range Wizard
Press WIZARD in the Template Range Editor. This Wizard simplifies entering a number of evenly
spread ranges, for example frames, between 0-255. This is useful to create positions for a scroller, or a
gobo/color wheel.
1. Open the Template Range Editor. See Device Template - Ranges .
2. Press WIZARD.
3. Enter the number of ranges you wish to create and press MODIFY.
4. Step to Centered and Snap Positions with arrow keys. Use MODIFY to toggle.
• Centered = The middle value of a range is always output when selected
• Snap Positions = Fixed positions (Start = Stop)
5. Select EXECUTE and press MODIFY (previously existing ranges will be overwritten).