ETC Cobalt Family v7.0.0 - Manual (Page 826)

824
Masters - Effects
Enter the number, hold EFFECT and press a Master Key to load to that Master.
You can load and play back effects from master playbacks. They are displayed with a "E" before
the number in the master displays.
Once an effect is loaded to a master you can
• Use the master fader to set the level
• Use the flash key to flash the group (if it has levels)
• Use the master key to select the effect
An effect contains effect attributes. These will always be dependent upon the last played back settings
for that Effect Playback, or manual control.
The Effect Playback on the Master does not contain any recorded settings at all but If the effect is
stored to a preset that is assigned to a master, the effect attributes can be set to
• Follow the fader up
• Follow the fader down (rubberband)
• Have a defined return status (previous, main pb, preset #)
• Not follow the fader at all
• Be activated on flash
See Master settings for effects .
Load an effect to a master
These functions are used to load effects to masters.
Function Keys Feedback
Load an effect [#] [EFFECT] &
[Master_Key] Effect # is loaded. The
number and name are
shown in the master display
Load several effects [CHANNEL] &
[Master_Keys] This loads the selected
effects into Masters one-
by-one at current
intensities.