ETC Cobalt Family v7.0.0 - Manual (Page 220)

218
Convert To Server
The Server system is the system that transmits output. The Backup system will start doing so when it
is converted to Server. This will happen automatically in case of a crash. It can be done manually at
anytime too, but only from the Backup itself.
The top of each screen indicates if a system is running as Server or Backup.
Changing manually
1. Select the Browser by pressing BROWSER (if it was selected it will be closed, press again to open).
2. Use the down and right arrow keys to open the NETWORK node.
3. Select Convert To Server and press MODIFY. You will get a confirmation message in the bottom of
the screens.