ETC Cobalt Family v7.0.0 - Manual (Page 303)

301
Templates - Type LTP or HTP
Each parameter in a Template can be set to LTP (Latest Takes Precedence) or HTP (Highest Takes
Precedence).
• HTP8 is used for intensity parameters
• LTP8 is used for 8 bit parameters
• LTP16 is used for 16 bit parameters*
This is set in the Template Editor.
See
Device Templates - Editor .
*Observe that the DMX offset of a parameter has to be incremented by 2, if the previous parameter is
set to 16-bit resolution.
See
Device Templates - 16 bit Control