ETC Cobalt Family v7.0.0 - Manual (Page 390)

388
Sequences - Crossfade Movefade & Lockfade
When you press RECORD to record a new Preset in a Sequence you will get the option to store it as a
Crossfade, a Movefade or a Lockfade. Each of these modes affects how channels in that Preset will be
played back when a the next crossfade is started.
Function Shortcut Feedback
Record a crossfade [RECORD] Normally a crossfade (x) is recorded.
This means that all channel values are
replaced when a new crossfade is
started.
Record a Move
Fade [+] & [RECORD] When a movefade (m) is followed by
another movefade, only channels with
new levels will be affected.
Record a LockFade [-] & [RECORD] When a lockfade (l) is started, the
channels involved will not be affected
by anything until they have finished the
fade they started.
Stepping in the sequence will stop
ongoing lock fades.
HINTS
• When you jump in the sequence with GOTO, the history of all fades will be executed to
recreate the correct state after the jump.
• GOTO & B updates the current state (scanning backwards in the sequence accumulating
Move/Lock fades).