ETC Cobalt Family v7.0.0 - Manual (Page 967)

965
Shortcuts - Dynamics (old)
These Dynamics functions can be used to start/stop and control older Dynamic Effects. Many of them
are soft keys in the Dynamics Soft Key Page. See
Dynamics - Control .
Start and stop Dynamics
DESCRIPTION SYNTAX
Activate an Dynamic Template for the selected
channels [#] [DYN_EFFECT]
Open the Live Dynamics List [DYN_EFFECT]
Select the DYNAMICS Soft Key Page in the Main
Display (softkey) [DYNAMICS]
Activate the Dynamic Template or Dynamic Table
list. [DISPLAY_LIST] &
[DYN_EFFECT]
Select all channels with a running dynamic
(softkey) [SELECT_ALL]
Select all channels with a running dynamic [CHANNEL] &
[DYN_EFFECT]
Clear running dynamics for the selected channels
(softkey) [CLEAR_SELECTED]
Clear running dynamics for the selected channels [C/Alt] & [DYN_EFFECT]
Load a Dynamic Template to a master [#] [DYN_EFFECT] &
[Master_key]
Delete the selected Dynamic from the Live
Dynamic Effect Display List (softkey) [DELETE_DYNAM]
Delete all running Dynamics (softkey) [DELETE_ALL]
Delete all running Dynamics (softkey) [ALL] & [DELETE_DYNAM]
Activate Direct Select for Dynamics (hold key for
2secs to get display) [DYN_EFFECT]
Open the Dynamic Effect List [MODIFY] &
[DYN_EFFECT]