Copy, cut & paste – ETC Cobalt Family v7.0.0 User Manual
Page 107
Advertising
105
Copy, Cut & Paste
The COPY/CUT and PASTE keys in the
programming section
are general keys, and can be used to
cut and paste for example Sequence Steps, Groups, Presets and Device Templates.
Action
Key
Feedback
Copy
[COPY/CUT]
The currently selected
object is copied.
Cut
[COPY/CUT]
[COPY/CUT]
The currently selected
object (devices excluded) is
cut.
Paste
[PASTE]
The last copied or cut
object is pasted.
NOTE
When you paste a Sequence step in the Sequence Editor, it will be inserted
before the currently focused step.
When you paste a Preset in the Preset Editor, you will overwrite the content
of the currently focused preset. This applies to Groups as well.
Texts can be copied with the shortcut CTL-C from a keyboard.
Advertising