ETC Cobalt Family v7.0.0 - Manual (Page 835)

833
Dual Fader mode for Sequences
When this mode is active, there are two modes involving two masters for controlling the
sequence loaded to the first master, and there are more configurable buttons for controlling the
sequence.
Setting a master pair to A/B mode
To be able to access these settings a sequence has to be loaded to the master. Hold SETUP and press
the Master Key. This will open Master Settings with this option:
You can select the following options
A+B
The sequence master and the next higher master will control the sequence as an A/B playback
providing a crossfader pair, just like when a sequence is controlled from the Main Playback.
Int + A/B
The first master controls the intensity of the sequence, and the second is a combined A/B crossfader.
The default button settings (press MODIFY on "Button settings for dual fader mode) are those listed
in the dialog above.