ETC Cobalt Family v7.0.0 - Manual (Page 981)

979
RFR Playback
Playback
Press MORE SK and then PLAYBACK to enter the Playback sub menu. The Playback functions are
Go Goto Record
GoBack Preset Update
Function Key Feedback
GO [Go] Next crossfade is started
GO Back [GoBack] Crossfades back to the
previous step
Goto preset/step [#] [Goto] Crossfades to preset # or
step # (depending on the
GOTO jumps to setting in
Setup)
Record preset [#] [Record] Records Preset # into the
Preset List. Only the levels
set from the remote are
recorded
Update preset [Update] The selected preset
(indicated as "Prs:#" on the
display) is updated with
levels from the remote field
Select Preset and levels [#] [Preset] Levels from Preset # are
loaded into the remote field
and channels of Preset # are
selected
Select Preset and levels [Preset] Shows a list of Presets. Use
encoder to focus a Preset
and click the encoder to
select Preset and load
levels into the remote field.
When recording or updating a preset a confirmation message is shown on the RFR display.
To enable recording/updating from remote, check the setup option "Allow recording from remote"