ETC Cobalt Family v7.0.0 - Manual (Page 213)

211
For the following commands use the CLIENT key of the console.
Action Keys Feedback
Toggle Clients on/off [CLIENT] Confirmation message at
bottom of screens.
Set permission modes [CLIENT] (held) As long as CLIENT is held
permissions can be set with
the direct selects. Currently
only Full Access and View
Only Mode are available.
NOTE
Be careful when using the client since you are making changes directly in the
server. Don't try to work on the patch from the client. In View Only Mode,
you can change the play on the main console - which you may not want to