Dynojet 250iP: Pit Installation Guide - Manual (Page 63)

I N S T A L L A T I O N
Pit Covers
Version 2 Model 200iP/250iP Motorcycle Pit Dynamometer Installation Guide
2-43
11 Install the drum guards using two 1/4-20 x 1/2-inch button-head flange screws
and two 1/4-20-inch crush nuts.
Note: If you installed the EEC finger guards, you will need to adjust them now.
Refer to page C-3 for adjusting instructions.
Figure 2-47: Install the Drum Guards
screw
drum guard