Dynojet 250iP: Pit Installation Guide - Manual (Page 86)

Model 200iP/250iP Motorcycle Pit Dynamometer Installation Guide
C H A P T E R 3
Extended Carriage
3-20
2 Use the extended carriage plate to mark and drill mounting holes as shown in
Figure 3-20.
2a
Using the extended carriage plate as a template, drill four 1/2-inch holes.
2b Install the Red Head anchors according to the instructions in Appendix A.
Figure 3-20: Extended Carriage Plate Mounting Dimensions
66.04 cm
(26.0 in)
40.32 cm
(15.875 in)