Dynojet 250iP: Pit Installation Guide - Manual (Page 71)

A C C E S S O R I E S
Air Brake
Version 2 Model 200iP/250iP Motorcycle Pit Dynamometer Installation Guide
3-5
5 Route the air brake air hose through the access hole in the drum module upright
and through the pit conduit.
6 Connect your clean, dry shop air supply (60 psi, 415 kilopascal, max constant line
pressure) to the air hose.
Figure 3-3: Connecting the Air Hose
air brake
pit conduit
air hose
to 60 psi
clean dry air
access hole