Dynojet 250iP: Pit Installation Guide - Manual (Page 73)

A C C E S S O R I E S
Air Brake
Version 2 Model 200iP/250iP Motorcycle Pit Dynamometer Installation Guide
3-7
2 Remove the Button board.
2a
Remove the four screws securing the Button board to the control panel and
set aside.
2b Remove the Button board and set aside.
Figure 3-5: Removing the Button Board
3 Unscrew the black switch body nut and remove the switch body. Set the nut and
switch body aside.
Figure 3-6: Removing the Switch Body
button board
screw
switch body nut
switch body