Dynojet 250iP: Pit Installation Guide - Manual (Page 65)

I N S T A L L A T I O N
Junction Box Cover, Cable Cover, and End Cap
Version 2 Model 200iP/250iP Motorcycle Pit Dynamometer Installation Guide
2-45
3 Loosely attach the end cap to the pit cover using two 1/4-20 button-head screws.
Leave these screws loose.
4 Secure the cable cover to the end cap and junction box using two 8-32 screws.
5 Tighten the end cap screws.
Figure 2-50: Secure the End Cap and Cable Cover
PD042
end cap
cable cover