Dynojet 250iP: Pit Installation Guide User Manual
Page 78
Advertising
Model 200iP/250iP Motorcycle Pit Dynamometer Installation Guide
C H A P T E R 3
Air Brake
3-12
7
Using a 9/16-inch ratchet and wrench, remove the bolt, washer, and nut securing
the spring to the brake assembly. The spring is located on the drum side of the
brake assembly.
Figure 3-12: Remove the Brake Spring
bolt
bolt
nut, washer, and spring
nut, washer,
and spring
Advertising
This manual is related to the following products: