Dynojet 250iP: Pit Installation Guide - Manual (Page 79)

A C C E S S O R I E S
Air Brake
Version 2 Model 200iP/250iP Motorcycle Pit Dynamometer Installation Guide
3-13
8 Remove the two bolts and two washers securing the brake caliper stop to the
brake bracket and remove the brake caliper stop.
Figure 3-13: Remove the Brake Caliper Stop
9 Remove the hairpin cotter from the bottom clevis pin located on the front of the
air brake assembly.
Figure 3-14: Remove Bottom Hairpin Cotter
brake caliper stop
brake bracket
bottom clevis pin hairpin cotter