Carrier Access Broadmore 1750 - Manual (Page 116)

7-2 Broadmore 1750 - Release 4.6
Configuration
Overview
Overview
Power-up ... 7-3
User Interface Requirements ... 7-4
Screen Display Annotation ... 7-5
Key Map ... 7-6
CAMMI Access ... 7-7
System Services Configuration ... 7-8
CAM Name ... 7-8
Ethernet IP Configuration ... 7-9
ATM Address ... 7-11
ATM Address List (optional) ... 7-11
Connection Retry ... 7-13
Retry Cause Codes ... 7-13
CIP over ATM (RFC 1577) ... 7-14
Static Routes ... 7-16
LANE Configuration ... 7-17
UNI Version ... 7-19
General Properties ... 7-20
User Security Configuration ... 7-23
CAUTION! F OR SECURE OPERATION , A S UPER U SER (C RYPTO
O FFICER ) SHOULD PERFORM THE INITIAL CONFIGURATION AND CREATE
USER ACCOUNTS , AS DESCRIBED IN CHAPTERS 10 AND 11.
The Broadmore 1750 must be correctly configured, using CAMMI, before ATM
network communications can be established. This section provides background
information, equipment requirements, and other prerequisites for accomplishing the
actual system configuration.
Configuration information is retained in three subdirectories collectively referred to as
the configuration database. Access to this database is to set variables to acceptable
values for successful operation. The three subdirectories are: