Carrier Access Broadmore 1750 - Manual (Page 338)

12-20 Broadmore 1750 - Release 4.6
SNMP Configuration
Access
Once this menu option is chosen, a list of existing access entries will be displayed. To
choose the required action on an entry, highlight any of the existing entries and press
the Enter key. The following shows the New Access Entry screen.
The Access entries implement the SNMP access policy for the Broadmore. For more
details, see
Access Policy below. The access table is used to enforce fine-grained access
rights that form an access policy. The access list is used to define the parts of the MIB
tree that are available for either read or write, for specific combinations of group and
security models. It also defines whether an incoming SNMP request needs
authentication and whether SNMP messages need to be encrypted.
The following table describes the selections.
Item Options Comments
Group Name string A group name from the Groups in the system, 1 to
30 characters.
Read View Name string A view name from the Views in the system, 1 to 30
characters. The Read View Name is for “get”
access.
Write View Name string A view name from the Views in the system, 1 to 30
characters. The Write View Name is for “set”
access.