Carrier Access Broadmore 1750 - Manual (Page 310)

11-44 Broadmore 1750 - Release 4.6
Security Management (FIPS Mode)
Logging in with SecurID Disabled
3. In the Session panel, type the IP address of the Broadmore, and select SFTP
from the Protocol pull-down menu.
NOTE: Some secure ftp clients do not allow a colon as the first
character. The following step works with SecureFX.
4. In the SFTP logon panel, type in the Hostname and Username. The Hostname
is the IP address of the Broadmore; the Username is Broadmore local user
name prefixed by a colon (for example, :SYSADMIN).
5. Select Keyboard Interactive from the Primary pull-down menu in the
Authentication panel.
6. Click OK. The following prompt appears:
7. Type in the local Broadmore password, and click OK.
After successfully logging in, the SecureFX window appears as shown in the
following graphic.