Carrier Access Broadmore 1750 - Manual (Page 132)

7-18 Broadmore 1750 - Release 4.6
Configuration
LANE Configuration
Using LANE may require static routes in a manner similar to CIP. Refer to the Static
Routes section above and the example in Appendix D.
Item Description
LANE IP Address This is the IP Address for the Broadmore 1750. To get onto the
ELAN, the address must be on a different logical subnet than the
OSC’s Ethernet IP Address. This address must be different than
the ATM CIP Address subnet.
Subnet Mask This is the subnet mask to be used in conjunction with the
Broadmore 1750’s LANE IP Address.
LECS ATM
Address This address is optional. This is the ATM Address of the LAN
Emulation Configuration Server, LECS. If the ATM Address of
the LAN Emulation Server, LES, is known and is entered below,
this LECS value may be left blank. If the LECS is needed and no
address is entered here, then the “well known” ATM Address (as
defined by ATM Forum’s LANE standard) will be used by default.
The “well known” default address is 4700 7900 0000 0000 0000
0000 0000 A03E 0000 0100.
LES ATM
Address This field is optional. The ATM Address of the LAN Emulation
Server is entered here. If data is entered here, the ELAN name and
the LECS ATM address will not be needed and will not be used by
the system if they are entered below.
ELAN Name This field is optional. If a name is entered, it will be sent to the
LECS to locate the LES for this ELAN. If the ELAN Name is not
specified, and no LES is specified, then, the default ELAN, as
entered in the LECS, will be used. The Broadmore 1750 is never
an LECS.
LANE Version This value will be either 1 or 2. Use the LANE version supported
and active in the segment’s LECS and in the other LE clients.