Carrier Access Broadmore 1750 - Manual (Page 184)

7-70 Broadmore 1750 - Release 4.6
Configuration
System Configuration
System Configuration
Save Configuration ... 7-70
Restore Configuration ... 7-71
Delete Configuration ... 7-71
Set Power-on Default ... 7-72
Save Card Defaults ... 7-72
Restore Card Defaults ... 7-72
The system configuration is quickly accessed via the configuration files as shown
below. There is a special option to save a configuration for powerup. This configuration
will automatically load with the application of power to the Broadmore 1750 after a
power interruption.
Select Save Configuration to save the current configuration and choose an appropriate
file name when asked. This should be done after each significant configuration change
so that the configuration can be quickly re-established at a later time.
Save Configuration
Follow the selection sequence below to save the current configuration. Enter an
appropriate file name (for example: 17may3pm). This file can then be used to
return to the current system configuration.
Select System Management
↵
Select Configuration Files
↵
Select Save Configuration
↵